Laurell Home Page
Laurell Home Page Laurell manufactures fine spin processors - spin coaters, spin etchers, spin developers...
Friday, May 09, 2008 
 
   
 
  • Provide greater capabilities for your process
  • Add flexibility to your development
  • Detailed instructions and free technical support
  • An affordable way to enhance
    the functionality of your spinner
 

SYRINGE-MANUAL
click for more details 		SYRINGE-MANUAL
>>> more about this accessory
  • Manual Syringe Dispense
 

SYRINGE-AUTO
click for more details 		SYRINGE-AUTO
>>> more about this accessory
  • Automatic Syringe Dispense
 

EXHAUST-DRAIN
click for more details 		EXHAUST-DRAIN
>>> more about this accessory
  • Exhaust and drain options
 

WAFER-ALIGN
click for more details 		WAFER-ALIGN
>>> more about this accessory
  • Wafer Alignment Tool
  • A perfect fit for
    100mm, 150mm and 3" substrates
 

SSV-1
click for more details 		SSV-1
>>> more about this accessory
  • Completely stainless steel (not acid compatible)
  • Holds 1 Gallon (actually 5 Liters)
  • Maximum height of 10.5"
  • 9.3" (325 mm) outside diameter
 

SSV-2
click for more details 		SSV-2
>>> more about this accessory
  • Completely stainless steel (not acid compatible)
  • Holds 2 Gallons (actually 10 Liters)
  • Maximum height of 16"
  • 9.3" (325 mm) outside diameter
  • optional electropolished finish shown
 

TEV-1
click for more details 		TEV-1
>>> more about this accessory
  • Teflon® Encapsulated
  • Holds 1 Gallon (actually 5 Liters)
  • Maximum height of 10.5"
  • 9.3" (325 mm) outside diameter
 

DCV-1B
click for more details 		DCV-1B
>>> more about this accessory
  • ECTFE (Halar®) Encapsulated Vessel
  • Dual-containment dispense lines
  • Easy to clean upright design
  • Easy-lock lid
  • Holds 1 Gallon standard bottles
  • Optional chemical bottle adapter available
  • Maximum bottle height of 13"
  • 9.3" (325 mm) outside diameter
 

INDECK-CONTROL
click to enlarge 		INDECK-CONTROL
    Laurell Technologies' Spin Processors can be mounted in a wet bench with an optional control system that is mounted in the upper panel of the bench. This option modifies your spinner for indeck installation (opting to not be benchtop capable), and includes all rewiring and the remote controller.
 

SPIN2000
click for more details 		SPIN2000
>>> more about this accessory
  • Windows™ 9x, NT, ME, and 2000 compatible
  • Load, save, and modify your spinner programs
  • Connects via RS-232 (Serial) port
  • Serial cable included with software
  • Compatible with the WS-400 and WS-500 series spin processors
 

VPC-1
click for more details 		VPC-1
>>> more about this accessory
    Vessel Pressure Controller 1
  • CP7-D Enclosure
  • Manual Stainless 2-way valve
  • Pneumatic PFA Teflon® 3-way valve
  • Stainless non-venting regulator
 

VPC-2
click for more details 		VPC-2
>>> more about this accessory
    Vessel Pressure Controller 2
  • CP7-D Mounting
  • PFA Teflon® 2-way valve
  • Pneumatic PFA Teflon® 3-way valve
  • PFA Teflon® non-venting cleanroom regulator


© 2002-2008 Laurell Technologies Corporation, All Rights Reserved
Please address any technical concerns to the

American Express, MasterCard, Visa  we accept most major credit cards